Marzetti's Blue Cheese Dressing

Dragonscale Chainmail - chainmail dragon scale

Na!! Today's entry was entitled: how to weave chainmail style dragon scale! (If you know the title is the one above, but I'm can put xDD there
titulosmuy
long to begin to end with something new. (I feel important, because it seems that there is no tutorial in English from this xDD). anyway I'm a little bored with net inflows up, so the next one will do the Lamellar that I started a few days ago

(Yes, Start a lamella n_n!)


good to go straight to the Once, in an effort to reduce some of my huge posts xD

Despite being the closest thing to European styles 4.1 of the "geeks" chainmail, style dragon scale starts with a fundamental difference, and is that it requires 2 different sizes of rings. of so the smaller will fit inside the larger or even smaller. To accomplish this easily the best thing is that when one is by wrapping the spring, when it arrives at the end of what would make one pass over the wire previously funky, by wrapping the spring on the previous spring. that is saved to be taking action and everything else strange

following is already starting to assemble. and there are two ways to do this process the first is somewhat tangled, so must be very careful about the images. part as follows: take a small open-loop and pass it two closed large ordenenlo and do not close the anillopequeño, as in Fig.

carefully now posing a Large closed loop "around" the little that remains open.
now spend two large open rings for the "yellow" and this time if you close it, then this process can comnzar denuevo adding new rings yellow rings "in the right direction, as in this other picture


that was the first method, the grace that has is that it can extend much as you want "across" uniting more rings in the first step. then you save yourself having to complicate coupling chains, which in this style is a bit more complicated.
basstante
the second is faster, if you can, as I said, grabbing a knack for the technique and not complicate both

chains linking different parts with a typical chain of 4.1 except that only open-ring usanto small closed rings large, so that when you finish the chain will look like so:

here you have to do is take large open rings and pass around the smaller ring in the same orientation of the other large rings, this is what gives the appearance of "flakes."

Once it is finished "scale" chains proceeds to link them to what neuve, there are two ways, one would attach strings with small rings mismamanera rodearlosde the previous step and the next would be this: let a large ring floating in the rings to join:

here wrong color for me in the ring, but it does not matter, take a small ring and close the other from inside the floating ring, so:


and once finished as to unite all rings will get something like so: n_n


Ready!

hope my tutorial helped again finds them reach new frontiers in the world of
xDD cotademallidad

says goodbye again the Viking Gauto
Arann