Cake Ideas Fora Lawyer

Slavic! (More tutorials xD) Reporting Arann

Greetings, Oh poor (but true) followers of my blog!, but rather colleagues and fellow members herreristicos adventures: P

you have not put a decent tutorial, so today, because I have pictures and then a long wait came to do

but I wanted to do something special, so, since itching to work on, I go too work and so far I have followed, if anyone is interested follow

yahoo! Slavonic helmet! ! !

you see, it all started with the fact that he was tired of the spangenhelms so I wanted to do something different and give a more motley collection of helmets my xDD, so I looked for pictures and found this among had already long ago ... little by little like I grab the helmet and just finished the previous I started with this.

Well, first thing is first of all take action, what I did was measure my head ciercunferencia, to give Qurie qu size helmet, divide by four panels and add 2 centimentros per panel (one per side) to have space riveted, followed by height, which gave me about 20 inches and then cut the sheet.


far sige simple, no?

the next step is to sink the plate to give the concave shape, is that there are ways to explain it better than mine, but I will anyway; The most necessary is to have a tree stump, which is has made a concave hole with a hammer that over and sink the metal (using a mallet and a half kilo with the rounded and polished, just in case, is quite comfortable).


the sagging starts from the edges of the plate, always, if you do not end up with some wrinkles metal could barely get the red metal, with luck (well, maybe I'm exaggerating, but it is a good choice xD). from there it moves toward the center of the piece to be finished first sunk, which is always very irregular.
















then given a second pass through the hole and ends by flattening all the irregularities in the flat on the stump, resulting in a quite acceptable piece endings.















thru is finally beginning to bear caracateristicos aspects of his helmet. in the photo above you can see the marks I made in the panel and flat and where there would be cut.

todabia
for now it looks pretty mundane aspect (xDD I like that word xD). to give this strange ornament that looked at the edges of the original photo Prove banging on the metal on the stump with a pointed tool punch, giving mastante look similar, it was only a matter of repeatedly hitting a line and voila, here it is better to use a hammer more Thin, not sink much punch and power to make several shots in a row.















(also in the photo looks like it lacks a bit of sandpaper xDD case was not very neat in that regard xDD). Well, here the problem is all the time it entails, I think it's the helmet that more work has involved me so far, perhaps only surpassed by the former, especially over the issue of the dots xD, which fortunately is only done in 2 xDD panels. as these clog the others.
then is drilled, it is siemple, one not lost on the site xD tools is done in two main panels and then marked on the side.

any So, until I arrive here today, it's late and I think a good time to leave the matter up here xD

the bulk of the helmet is already over, but even I have to fix some photos to be a little more explanatory and continue xD with the remainder of the hard work

xD mmm nomas

that for now
Greetings to all who pass

and for those who are not already common, not afraid to post xD

I Want To Play Pokemon Online

as to say, had a good number of days absent from my blog totalmetne

S WHO and the truth is like having a lot to go now, but I wanted to give it some life that he came haceindo missing.

not a lot has happened in reality and I have not done many bone


xD I sold two helmets including my own personal helmet, Quie so I had to start one soon to replace it, and this is what I

crowning the "mountain cotamalla" in the recondite xDD land my room

what else?
went back to buy a watch because he had lost the previous u_u, although the wire and I just have not had time to do more for the chain, but a picture.


other hand, enter a fencing academy, to put the batteries to have to train my own group which aims to train, if there recreción here .... I'll have to take care I myself do that, and even has a name n_n; "Hederlag" or "Act of Honor" in English: P
hope I can pull it off: P

although the idea would go with something more generically medeival, to attract all tastes, and then specialize more ....



mmmm I made further progress with the lamellar, so soon I can put something else whether it be a little more explanation about

and I also get an amount of carbon Buan ore from the southern lands, so can hardly be moving into the forge also



now that Pora nomas
Greetings to those who pass and Id with good passes
y. .... diaroio sick people around here .... not be afraid to comment xD wow

Excess Hemoglobin Sleep

Lamellar Armor! xD (progress)

wearing time without

upload something new camera but I get a couple of days so I was getting a lot of photos, for example those of my progress with so

Lamellar now upload a small tutorial (somewhat incomplete, but serves to get the idea as work)

by way of introduction, the Lamellar armor is a type of scale with the addition that all scales are linked together in Instead of being so with a basis of leather or fabric, this reduces the weight and I think it gives more flexibility, the lamellar is considered the next evolution of the levels of scales and were used by people of most people, counting the tibet, Byzantium, China, Slavs and Scandinavians somewhat, mainly rus, although it is acceptable that have been used in Scandinavia around the Viking Age there are insufficient data to say for 100 % security, although data are found but are beyond the Viking Age, from the Battle of Wisby in 1361.


Well, well, the point is that I had long wanted to do something more armor, beyond the chain mail, so get some information, I saw a photo Poar and using steel strips 4cm by 1 meter that I had bought a long time to build hulls

draw scales on them and then cut with a mower While metal Cuatic a friend has hosted in my house xD and passed that gave them shape with tin snips / flyer

ones were cut after it had drilled, for which I used a punch on my stump in tapping sink as a punch, as you had recommended me n_n Harald, this vastly reduced working time, but even so it is nothing less drilling, and saw that my best punch annealing and died I had to use a smaller and review

drill holes with each scale consisting of 7 holes, as seen in the photo, marked with a green marker (do not look very good, but they are there)

then, after devian peroforado and estimated to be 27 per round scales crusade for my back and could tie it backwards, and not where they sell leather laces had to cut me a really big piece that I had out there .. xDD

truth everything was very tedious because it is not automatic trans how to coordinate, but the results are equally good, To join the scales to do the same thing if you stow sewing, leather wax first and then what happened was heard by all so make it look tidy.

The most difficult is joining the ranks of vertically, as it requires the same leather thread through 2 times the upper hole in the scales, and this leaves half loose everything, so I am considering two holes instead of one, to subtract work xD

but either way ahead is a fairly even, that although the photo I have not finished you can appreciate what I have so far.




and ... "Yet even as we move forward with the lamellar explain more would follow, because this seems a little sketchy to be a tutorial, but at least appreciate the whole process and

Greetings Go with either
Adios

Arann

Marzetti's Blue Cheese Dressing

Dragonscale Chainmail - chainmail dragon scale

Na!! Today's entry was entitled: how to weave chainmail style dragon scale! (If you know the title is the one above, but I'm can put xDD there
titulosmuy
long to begin to end with something new. (I feel important, because it seems that there is no tutorial in English from this xDD). anyway I'm a little bored with net inflows up, so the next one will do the Lamellar that I started a few days ago

(Yes, Start a lamella n_n!)


good to go straight to the Once, in an effort to reduce some of my huge posts xD

Despite being the closest thing to European styles 4.1 of the "geeks" chainmail, style dragon scale starts with a fundamental difference, and is that it requires 2 different sizes of rings. of so the smaller will fit inside the larger or even smaller. To accomplish this easily the best thing is that when one is by wrapping the spring, when it arrives at the end of what would make one pass over the wire previously funky, by wrapping the spring on the previous spring. that is saved to be taking action and everything else strange

following is already starting to assemble. and there are two ways to do this process the first is somewhat tangled, so must be very careful about the images. part as follows: take a small open-loop and pass it two closed large ordenenlo and do not close the anillopequeño, as in Fig.

carefully now posing a Large closed loop "around" the little that remains open.
now spend two large open rings for the "yellow" and this time if you close it, then this process can comnzar denuevo adding new rings yellow rings "in the right direction, as in this other picture


that was the first method, the grace that has is that it can extend much as you want "across" uniting more rings in the first step. then you save yourself having to complicate coupling chains, which in this style is a bit more complicated.
basstante
the second is faster, if you can, as I said, grabbing a knack for the technique and not complicate both

chains linking different parts with a typical chain of 4.1 except that only open-ring usanto small closed rings large, so that when you finish the chain will look like so:

here you have to do is take large open rings and pass around the smaller ring in the same orientation of the other large rings, this is what gives the appearance of "flakes."

Once it is finished "scale" chains proceeds to link them to what neuve, there are two ways, one would attach strings with small rings mismamanera rodearlosde the previous step and the next would be this: let a large ring floating in the rings to join:

here wrong color for me in the ring, but it does not matter, take a small ring and close the other from inside the floating ring, so:


and once finished as to unite all rings will get something like so: n_n


Ready!

hope my tutorial helped again finds them reach new frontiers in the world of
xDD cotademallidad

says goodbye again the Viking Gauto
Arann

A Letter To Someone Who Is Depressed

How nice! other input (such as making chain mail 2!)

Salve!

long ago I wrote an entry on how to make one for devia constructed a beautiful coat of mail ....

but I run out of photos and I could only do half. . . but today I took pictures! chelates other half so is now, with my own technique of how to weave mesh (I thought it was the most common, because my eyes is the fastest possible, but little by little I find that all the "mesh size" SIGEN endeavoring to unite basic unit one by one...... if they are all very poorly focused xDD

first unaminima introduction to the types of tissue conosco.
1 .- put the rings one by one (stupid if you ask me pejorative conosco xD Quelo two people were doing so)
2 .- chains assemble basic units and then joined (quite similar to what I do, but much slower) 3 .- arm chains
and join them xD (basically that) (notice that this method has a good amount of detail for effective imprecindible speed, but with a little attention deveria no problems)

to start there is the basic unit that we all know .
open ring laying spend 4 closed. no more science in it


now, the difference being that instead of making more of these, take a ring-opened and closed the ONLY 2 pass.


to reduce this time, I always in my hands, put rings in an area of \u200b\u200bsupport by joining them, and for this to go well you always have to be careful orientation rings on the drive you have on hand. as mentioned in the previous tutorial are funky rings in one direction with a purpose, and that's it.

when you take the basic unit between the thumb and index Almedio ring of the basic unit must always be the side that sticks to the same hand thumb (as shown in the picture) rings open so that come naturally in the direction of the arrow shape (in the photo is not much, but in reality is so xD)



The same, making it an area of \u200b\u200bsupport would look like this:



the following is to continue this procedure until achieve significantly longer chains (I birth my p queexedan chains echo by about 20 centimeters) and once they proceed to join them. for which there are 2 posivilidades again, or do it on a surface, which continues to be simpler, or put together a pair of rings in this way and then taking the two hands strings them together like this: (Here let larger photos, so they could see better)




is first passed a ring just as the photo shows, but once closed the ring must not drop the wrench (or pliers, if you prefer to call it so). remain strongly affirmed the two chains in this way and is to find another open ring to pass through the next segment to be joined.


the rest is to keep doing the above steps until you have many lines together, so that the next step would be to link the structure of the dimension. here, too many people are complicated.

the thing is to make a shape like this, that the head passes through the heard this, that the "body" is about 20 inches wider than the torso of oneself and the sleeves make room for the arms xDD






all together once a algocomo deveria be so: there
and all that remains is to continue to extend chains and uniting them wherever you want as the sleeves


that depth of the photo is the same one I have now finished (the photo in my profile) these days you were enlarged sleeves and rings are tutorial I'll use to get longer . photoshop color courtesy of the penultimate photo also


xDD that was it for this tutorial, the following will probably make my way of helmets or unusual styles of chain mail: P if they serve me happy n_n
ojala aya

that could help them learn or do even faster
their coats of mail and Eid greetings
with well
Arann

Breast Tortur Hanging

Another count!! this time for a change, goldsmith.

Salve again, souls of the ancient world!
I hate to continue with eteeernas counts and entries, and it will interesting!

eager to start this written denuevo and no camera was just me .... but one thing counts! xDD

this time is the odyssey of the Viking Geat Arann in the world of noble metals. besides everything is aprendis Arann goldsmith, more specifically of the goldsmith , Christian Ullrich, among other things Herrero, medieval fencing expert and member of the Norwegian colony in Chile .... xD data only mode.

someone once said "do not tempt me with gold, my son, my metal iron (Eyvind," father "of Siegfried in the movie Ring of the Nibelung). is remarkable that phrase and I identify a lot with it, but still I can not ignore the magic of this job: P

as other data, is a jeweler who sells jewelry, a goldsmith who makes it. Lala

good, now if I start.
deve
all have started some 2 or 3 years (more eguren 2) and had a couple of years in the coats of mail when I found this and is "wow"! was the first time I knew Joeri mesh, and further, the saw to reach.

in a couple of days and had found a supplier of silver wires, gold-filled (metal with a small gold content) and goldsmith tools. I was, I got a new pair of pliers and a few grams wire (silver, gold-filled and gold silver ounce sold here is more or less half a euro (300 Chilean pesos) a gram, 2 gram of gold-filled (1300) and about 20 gram Gold (15000).

first thing I did was a Byzantine-style bracelet and rings of 5 mm internal diameter (the wire is 0.8 mm thick, so that the fabric looked pretty mediocre, but was clearly happy with the xDDD result) I have pictures of that band, but the following styled "Middle Persian" (half-persian)


so I developed it, along with the coats of mail, and doing enough business actually get to earn enough money in about half year (about 100,000 euros pesos/143 for a child of that age was quite unfortunately was never all together xD)

also began to make smaller rings, 3mm in the bowels of the pencils bic, with these the result was bastaaaante better than the 5 so that helped me a lot to get the money up (although many of those things I bought my old xDD).

in the photo is a 3mm chain ring, one half is half persian and half now if it is Byzantine.

and so spend time while still working alone on the wire. sometimes even worked with tin, and to outstanding mold, melting the tin, it was the only thing I could Fundor to temperatures might reach, soon come a time when I had enough money to melt
expeimentar
something I have not had success xDD, only had a torch so that only obtains his gasfiter a lot semisoldados wire protruding from a rock opaque and amorphous.

it was not until the day of my graduation my parents gave me a goldsmith's torch, and with that I could finally melt the metal.

So the day I went into my first big project orfebreristico a Mjöllnir or "hammer of thor", had long wanted one without the posivilidad to do, providing various forms and techniques that I will explain in due time. and more or least 7 attempts, the third one finally worked, and my Mjollnir, if biuen was not perfect, it could at least be taken to the neck without shame xD

So it was more or less came out of the mold, of course, after having sanding enough and frosted with a couple of dremel tools, ahh, and shackle him to hang soldier .... That was also an interesting job, a drop forge red silver to make a small sheet and this one more thing had been close to a lot of fun xDD, although he did not know weld or silver solder and had founded the whole thing about trying to do ...


I fixed a little later, I made a few more things triskel and, most failures, and in November last year the change came last. In the medieval festival that takes place here every year (for 3 years only, we are still growing xD) I met Ullrich, the goldsmith Viking, and although it is somewhat late, in March this year between classes to take seriously goldsmith with him.

Devo say that although the course was somewhat expensive, knowledge is money (as I said otroconocido but who also knew Ullrich) in the first class already knew well cast, solder, sheet and set, My first job was a pendant of Celtic inspiration, made in silver.
the next ring of inspiration followed by Viking and so pretty time doing various jobs, learning various types of crimping and technical services.

For those who believe, anyway, that the goldsmith is a delicate job .... xDD it was wrong, laminar metal is the hardest work I've done in my life xD. hours rotating metal roller lever overcoming all metal resistance .... is not less xD


and ... more or less now that I'm actually getting ready to work on a commission right now xDD


but it took from March, so do not think that's all I've done .... there is still a xD little

this cube was one of my first creations
although technically it was also an exercise in those classes (someone tells me how the hell did wright exercise? xDD). make that cube was one big xD can cost a tremendous way xD but in the end went well and was beautiful. And it served to learn




this slope is of my latest creations, although it was the first piece I designed
, the first day I went to those classes. I personally think it looks great, I did that day I said to myself "let's see if it xD" before beginning

a couple of days after setting it the "eye of tiger" and was able to finally terminated.

emm ..... of the rest so I have no photos good xD, but I assume that the upload when you start doing tutorials. and if they will put tutorials! I promise! xDD that



Greetings

Arann

Very Soft Cervix Before Period

some tutorial, at last: how to make a chainmail

I know I'm not the first to offer a tutorial on how frabric a coat of mail in this world, neither in this language, or blogger, or blah blah blah and certainly not be the best. But it's the way I do, and certainly much GetN still do not know their own levels may encontrarloutil in its own way, even people who know them find the little details that help make your job more enjoyable

n_n tutoiriales later start with the other net fabrics, such provably are most useful to all who pass through here.

well, the first thing always is to have the wire, the most serious historical use of iron wire, perhaps of mild steel or mild steel but either way the most affordable in these times is the galvanized wire. for a chain mail of historic proportions and quite pleasing to the eye we recommend you use 1.6mm wire (no. 16 gauge) and make the rings with internal diameter of 8mm.

this requires a small and primitive mechanical devices that recently learned was called as "frame", in my case I do something much more simple, take two eyebolts closed ( are these bolts that end in a ring ) knew how much time i was looking for a picture! or even the name! x_x)

and a cylindrical metal rod with a diameter of 8mm and about 45 cm long, the bar having a perforation deve around 30 cm in some extreme, where it can pass the wire and the shorter end remaining from the hole deve FRMA bend crank (I did it with a blowtorch heating and hammering on a piece of railway track, but everyone can find the easiest way to do it, maybe even with your good time in the kitchen fire is hot enough.)

good, here take the 2 eyebolts screwed into a wooden surface at its discretion, handle is passed by them and Voilà! (So \u200b\u200bis wright, not xD) you instantaeo and portable rack as shown in the photo (I hope you appreciate well there, because more than anything is a panorama of my desk xD).

when you already have it ready the next process is quite deductible, you put a wire through the small hole and begins to roll up.
way of detail (these details which one is noticing and always make you a little more happy to stop too long a little less for each ring xD).

the thing is that you do a roll up in the direction of "upward to a downward toward the front and up again. Or as seen here. What this does is that rings cut is always the right end is down and left up, and that is more ergonomic to the hours of the fabric.


The next step is, after having been in this way a long time, wire by wrapping as if there was one morning you'll find that already have a good number of coils / springs / springs or whatever you call them wire and what to do then is cut deve. for this purpose especielmente recommend using a "snips" or "scissors Aviator."

some of the advantages of this new device are:
- cuts metal with great ease, much more than cutting pliers or whatever ...
-leaves rings near-perfect cuts, instead of the irregular points of cuts with alizcates normally could make it come out the rings if
- to cut several rings at once, reducing a large percentage of time do cut rings (usually shorter than 7 or more rings 8mm)



There in the photos you see the whole spring wound on the "frame" that is loq is remove the springs from there and start cut. in the right picture looks like I do with scissors aviator (and lots of rings cut down), however there is a very important poas I jump on that photo.

What makes one cut all rings is opened (a little) a whole half and close the other (do not think qwue very hard to imagine an open and a closed ring so I do not think I would put any pictures (like I would do if I had the camera xDD).

I skipped step in that photo is to open all the spring before, which all rings are cut open, so saving me having to open the half and I have only to close the half, really is a measure that subtracts long time, so it is recommended


n_n And that would be all that is before the "weave" unfortunately caresco chamber at this time, so I'll post the rest of the tutorial during the week.

weaving is a tedious process, which does not mean is not simple, there are many ways of doing inking, all differ in small details nomas, my style in particular has a lot of details, and may be annoying to have to worry Thin everyone, but I assure you that those details make the faster method that I have achieved so far: P

that for now, until a couple of days more xD